The PrintNC CNC completed it's first milling operation on the spoilboard. No smoke from spindle and all went well. The next job will be tramming. I'm using UCCNC as my software with the UC300ETH-C76 controller. I used a CPU radiator for cooling with a small pump and reservoir using aluminum safe antifreeze. Flows well and spindle only felt slightly warm to touch after running 1.5 hours at an RPM of about 15k. Still need to integrate spindle operation into UCCNC. Also, need to place limit switches but the UCCNC has soft limits that worked well to prevent any crashes as I figured things out. Looking forward to seeing what the mill is capable of.
- Категория
- Самодельные станки ЧПУ
Комментариев нет.